Made in Melbourne. Supplied to Brisbane.
Timber gates for Brisbane: choose your openness
Timber Gates Online supplies made-to-order timber gates to Brisbane, with manufacture in Melbourne. The listed Brisbane delivery fees are $250 for a pedestrian gate and $500 for double gates, including GST. Choose from 42 designs and compare the open or enclosed sections before requesting your final specification.
- Custom-made in Melbourne
- 42 timber gate designs
- Allow 4–6 weeks from time of order
- Gate and listed delivery prices include GST
Decide what you want to see through
Privacy is a panel-by-panel choice. A gate may have a solid base with an open top, open boards from top to bottom, lattice, spindles or a pierced ornamental section. The installed photos help distinguish a decorative line from a real gap. The preview colours actual see-through spaces baby blue, leaving the timber and closed panels white.
Start with the standard treatment shown for the selected design. Some lower panels stay solid when the top is changed. Where a design has separate upper and lower slatted sections, use the individual controls rather than assuming one choice alters the whole gate. Enclosed backing and other changes are requests to confirm in the final quote, not automatic manufacturing approvals.
Brisbane delivery is a separate line in the estimate
For Brisbane, select pedestrian or double gates before adding delivery. The delivery fee is $250 or $500 respectively, including GST. The underlying gate calculation is based on opening width: $1,200 per metre for a pedestrian gate, or $980 per metre for a double or sliding gate. The current base price does not increase with height.
The Brisbane figures do not establish a delivery rate for every Queensland destination. If your address is outside the stated area, request confirmation instead of treating Brisbane as a statewide charge. Sliding-gate delivery also requires a separate quote. Give the suburb, postcode, proposed dimensions and any receiving-access details when you contact us.
Ask the right questions before manufacture
Send a photo of the full entrance and record the clear post-to-post opening. Enter the overall gate height at the highest point; the calculator retains the selected arch or dip in proportion. Existing posts, ground clearances and hardware need review before those opening dimensions become manufacturing sizes.
Tell us where the gate will be installed and ask which finishing and maintenance instructions apply to the specified timber and exposure. Use the timber gate care guide to plan painting and ongoing maintenance. Allow 4–6 weeks from time of order for made-to-order work, then confirm the delivery schedule and your installation arrangements separately.
Gate prices and delivery
Prices below are in Australian dollars and include GST. Gate pricing uses the full post-to-post opening width once; height does not change the base rate.
| Pedestrian gate | $1,200 per metre of width |
|---|---|
| Double or sliding gate | $980 per metre of total opening width |
| Pedestrian delivery | $250 |
| Double gate delivery | $500 |
| Sliding gate delivery | Quote required |
Posts, hardware, installation and custom extras are quoted separately. Allow 4–6 weeks from time of order; confirm delivery arrangements and timing for your address with your quote.
Size your gate and calculate an estimateBefore you request a quote
Measure the clear post-to-post opening and the overall gate height at its highest point. Choose pedestrian, double or sliding, then compare the solid panels and open sections in your chosen design. Baby blue in the calculator marks see-through gaps. Tell us whether you already have posts and include your delivery suburb and postcode.
We make the gates in Melbourne and confirm delivery arrangements for your address. Include your installation requirements and site details when requesting a quote.
Read the gate quote checklistQuestions about timber gates for Brisbane
What is Brisbane delivery for timber gates?
The listed Brisbane fee is $250 for a pedestrian gate or $500 for double gates, including GST. These amounts are added to the gate estimate. Sliding gates and destinations outside the stated area need a delivery quote.
Can I order a solid base with an open top?
Many catalogue designs show that combination. Select a design with a solid lower panel, then compare its top treatment in the calculator and the original photo. The final quote confirms whether a requested variation can be manufactured.
What does the baby blue colour mean in the drawing?
Baby blue marks a see-through opening, such as a gap between slats or an opening in lattice or spindle work. It is not the gate’s paint colour. White represents timber or a closed panel in this illustration.
Are these gates manufactured in Brisbane?
No. Timber Gates Online makes the gates in Melbourne and handles Brisbane supply enquiries. This page does not claim a Brisbane workshop, showroom or installation service. Confirm the final supply and delivery arrangements directly with the business.
Compare Australian delivery destinations and rates · Ask about your entrance
Compare the design details
Finlay
The Finlay timber gate features spaced horizontal slats within a straight rectangular frame. The drawing includes a slat-profile detail, and the installed example shows the open horizontal pattern.
Design example, made to your measurements.
Coler
The Coler timber gate uses evenly spaced vertical pickets inside a straight rectangular frame. Its open construction and minimal decoration create a simple entrance design with clear sightlines.
Design example, made to your measurements.
South
The South timber gate pairs a lattice upper panel with vertical lower infill and a gently shaped top rail. The diamond pattern adds an open decorative band to the design.
Design example, made to your measurements.