ORIGINAL DESIGN REFERENCES · MADE TO ORDER · SUPPLY ONLY
Singleton Timber Gate
Singleton’s original drawing has a level outer top rail with a curved line beneath it. The photograph shows enclosed vertical-board panels and a matching pedestrian entrance. The light band under the outer rail should not be mistaken for an open-picket panel.
A level outer rail over a curved panel line
Which sections are open or enclosed?
The calculator starts with enclosed infill. Confirm the curved panel line and any requested departure from this configuration.
In Drawing, baby blue indicates see-through spaces. White represents timber or an enclosed panel. The catalogue images are fixed references; the concept sketch responds to measurements and the available section choices. Decorative through-cutouts are openings, not applied ornaments.
Measure your opening for Singleton
Enter the clear post-to-post opening and the highest overall gate height in millimetres. For double gates, give the full opening once. Choose pedestrian, double or sliding in the calculator, then confirm the final proportions, fitting clearances and details before manufacture. The concept is not a photograph of a gate on your property or a final manufacturing drawing.
A sliding layout also needs installer checks for run-back space, overlap, supports and operating hardware. Original photographs of swinging gates do not establish a completed sliding installation.
Gate supply, finish and warranty
Standard LOSP treated pine gates are supplied treated and raw, with 65 mm standard gate thickness. Other thicknesses and timbers are available by custom enquiry. Frames use mortise-and-tenon joints reinforced with custom-made 300 mm screws underneath the joints. See the construction evidence and workshop photographs.
Gates carry a 10-year manufacturer’s structural warranty. Keep treated pine painted and maintained: repaint or touch up every two years. Read the painting and care guidance.
What does supply cost?
Base estimates are $1,200 per metre of opening width for pedestrian gates, or $980 per metre of the total opening for double and sliding gates. GST is included; height does not change that base rate. Delivery, posts, hardware and custom extras are separate. Custom specifications and delivery must be confirmed in your quote.
Made to order: allow 4–6 weeks from time of order. Buy the gate direct, source a compatible motor separately if needed and hire your own carpenter or gate installer. Motors and installation are excluded from the base gate price.
Compare the design before requesting a quote
Compare Winton and Emerald alongside Singleton. Check the outline, rail positions and open versus enclosed areas rather than choosing by name alone.
Send your selected design, opening, overall height, post requirements, suburb/postcode and entrance photographs. Use the calculator walkthrough to prepare your estimate.