42 DESIGNS · SUPPLY ONLY · MADE TO YOUR MEASUREMENTS
Willow Timber Gate
Willow combines spaced vertical pickets with a sweeping curved brace. The spaces around the pickets are visible openings. The curved brace is a structural design detail; it does not indicate an enclosed panel behind the pickets.
Open pickets and a sweeping curved brace
This is a useful design to compare when you want a view through the entrance. Check the original photograph and drawing together, then compare the available open or enclosed section choices in Drawing. Ask us to confirm any requested backing, rail positions and changes in your final specification.
Original catalogue references show particular examples, not the exact proportions, finish or hardware of a new order. The responsive concept drawing is indicative; final shop drawings are confirmed before manufacture.
Size the Willow for your entrance
- Measure the clear post-to-post opening in millimetres. For double gates, give the full opening once.
- Give the highest overall gate height, including the shaped top. No separate middle-height input is required.
- Choose pedestrian, double or sliding, then check the available section treatments in Drawing. Baby blue indicates see-through spaces.
- Tell us whether your posts are existing or required, and include entrance photographs and your delivery suburb/postcode.
For a slider, show the run-back space beside the opening. Your installer must confirm support, ground conditions, operating clearances and motor compatibility. The calculator does not approve a site or replace final drawings.
Supply-only prices and inclusions
The base gate estimate is $1,200 per metre of opening width for a pedestrian gate, or $980 per metre of total opening width for double and sliding gates. GST is included; height does not change that base rate. A 1,000 mm pedestrian opening gives a $1,200 gate estimate; a 3,000 mm double opening gives $2,940. Delivery, posts, hardware and custom extras are separate.
Buy the gate direct and choose your own carpenter or gate installer. Buy a compatible motor separately if needed; motors and installation are excluded from the base gate price. Your confirmed quote controls the final specification and inclusions.
Made to order, supplied ready for painting
Standard LOSP treated pine gates are supplied treated and raw. Standard gate thickness is 65 mm; other thicknesses and timbers are available by custom enquiry, with specification and pricing confirmed before manufacture. The frame uses mortise-and-tenon joints reinforced with custom-made 300 mm screws underneath the joints.
The manufacturer’s structural warranty is 10 years. Keep treated pine painted and maintained: repaint or touch up every two years. Read the painting and care guidance. Allow 4–6 weeks from time of order; confirm freight arrangements separately.